PIX 501 and 506 are fixed firewall modules with only inside and outside interfaces and as such you can implement DMZ with them. Your next bet is the PIX 515.
Regards. ----- Original Message ----- From: Mcfadden, Chuck To: Sent: Monday, November 26, 2001 2:37 PM Subject: RE: PIX 501 [7:27002] > You need to purchase an additional NIC to have a DMZ. It comes standard > with two interfaces, as you stated. > ccie1ab > > -----Original Message----- > From: Alex Lee [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, November 21, 2001 12:01 PM > To: [EMAIL PROTECTED] > Subject: Re: PIX 501 [7:27002] > > > I followed the link. The data sheet says : > > Quote > Interfaces > Console Port: RS-232 (RJ-45) 9600 baud > Outside: Integrated 10BaseT port, half-duplex, RJ45 > Inside: Integrated auto-sensing, auto-MDIX 4-port 10/100 switch, RJ45 > Unquote > > The way I interpret this is that this PIX basically has two interfaces :- > one outside (10BaseT port) and one inside but implemented as 4-port switch, > which means you can only have two segments and no DMZ. Please correct me if > I am wrong. > > > > ""Ole Drews Jensen"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > If you look here (watch for wordwrap) > > > > http://www.cisco.com/warp/public/cc/pd/fw/sqfw500/prodlit/px501_ds.htm > > > > You will see that it has 4 x 10/100 Mbps ethernet interfaces. > > > > This could be a newer model, but this one with 10 users and 3DES > encryption > > license, can be bought from new for $495.- > > > > Hth, > > > > Ole > > > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > Ole Drews Jensen > > Systems Network Manager > > CCNP, MCSE, MCP+I > > RWR Enterprises, Inc. > > [EMAIL PROTECTED] > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > http://www.RouterChief.com > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > NEED A JOB ??? > > http://www.oledrews.com/job > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > > > > > -----Original Message----- > > From: David Tran [mailto:[EMAIL PROTECTED]] > > Sent: Wednesday, November 21, 2001 9:38 AM > > To: [EMAIL PROTECTED] > > Subject: Re: PIX 501 [7:27002] > > > > > > My take on the PIX501 is that it is similar to Cisco router 2501 in that > the > > hardware is > > FIXED. It only has two interfaces. If you want to add another segment to > > your network > > (i.e. DMZ) then you have no choice but to upgrade to either a 515 or > higher. > > Other than > > that, the PIX IOS code is the same through out the PIX Series (with the > > exception that for > > the 501 and 506 you don't have redundancy (fail-over support). > > > > ----- Original Message ----- > > From: "Alex Lee" > > To: > > Sent: Wednesday, November 21, 2001 9:57 AM > > Subject: Re: PIX 501 [7:27002] > > > > > > > Has anyone used this PIX yet ? > > > > > > There were some discussions about this topic 2 weeks(?) ago but none of > > the > > > participants to the discussion has had any actual hand-on experience > with > > > the PIX 501 at that time. > > > > > > I got a quote from our supplier for a new PIX DES bundle with 10 user > > > licence for less than $500.00. _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=27528&t=27002 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]