the simplest way is using a win 2k server configured with RRAS and NAT ,this allows u to configure address pool ,also u have the option to configure nat to act as a virtual dhcp server
Farhad "NKP" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi everyone > I wanted to get advise for two configurations for ISDN > 1) > I am facing an error on my ISDN bri connection . > I have got a static IP address from my ISP , when I give that IP to my bri > s/t interface I am able to connect and authenticate with my ISP but my > internal , ethernet users aare not able to access the internet. If I give > the command of Ip address negotiated , they are able to connect to the > internet. > Can anyone let me know how I should configure the bri port with the static > IP address > > 2) Can anyone let me how to configure an IP address pool for the ethernet > hosts using DHCP pool on the router > > thanks in advance > > Navin Parwal > > My present config which works fine is as follows . > > > > RouterA#sh run > Building configuration... > > Current configuration: > ! > version 12.0 > service config > service timestamps debug uptime > service timestamps log uptime > no service password-encryption > ! > hostname RouterA > ! > enable secret 5 $1$Lne8$JqWDImO7J8ZvKdCD0xPKR. > enable password cisco1 > ! > memory-size iomem 10 > ip subnet-zero > ! > isdn switch-type basic-net3 > ! > ! > ! > ! > interface Ethernet0/0 > ip address 192.168.1.1 255.255.255.0 > no ip directed-broadcast > ip nat inside > no ip mroute-cache > no cdp enable > no mop enabled > ! > interface Serial0/0 > ip address 135.25.1.1 255.255.255.252 > no ip directed-broadcast > no ip mroute-cache > no fair-queue > clockrate 64000 > ! > interface BRI0/0 > ip address negotiated > no ip directed-broadcast > ip nat outside > encapsulation ppp > dialer string 226476 > dialer-group 1 > isdn switch-type basic-net3 > ppp chap refuse > ppp pap sent-username ksnarooka password 7 15020A1F172B2827 > hold-queue 75 in > ! > ip nat inside source list 10 interface BRI0/0 overload > ip classless > ip route 0.0.0.0 0.0.0.0 BRI0/0 > no ip http server > ! > access-list 10 permit any > dialer-list 1 protocol ip permit > dialer-list 1 protocol ipx permit > ! > ! > line con 0 > exec-timeout 0 0 > transport input none > line aux 0 > line vty 0 4 > password cisco2 > login > ! > no scheduler allocate > end > -- Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=27508&t=27488 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
