Thanks All for the reply! When I look at that manufacturing part number for the supervisor engines, the part number are little bit different between the first and the second sup. engine. The second supervisor engine has a "/2" or something like that at the end of the part number. Does that mean this card is only working on the second slot of the chassis? Is it interchangable between slot 1 and slot 2 with the same supervisor engine card? Again Thanks!
""MADMAN"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Yes you can do that no problemo. Even if the current 6506 is in > production you can pull the inactive sup and "shouldn't" drop a packet > assuming your don't have HSRP running with active interfaces on the > second MSFC. > > Dave > > Thomas wrote: > > > > Hi All, > > > > I have a CAT 6506 with dual supervisor engines and dual MSFCs. I also have > > another 6506 chassis with power supplies. I wonder if I could steal the > > second supervisor engine (second slot) w/ its MSFC and put it on the second > > 6506 chassis? Will the second 6506 chassis be working with second > > supervisor engine and MSFC card? Thanks! > > > > Thomas N. > -- > David Madland > Sr. Network Engineer > CCIE# 2016 > Qwest Communications Int. Inc. > [EMAIL PROTECTED] > 612-664-3367 > > "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=27635&t=27544 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
