Hello, Bill. In my experience, when you try to bind the second address, NetWare will complain that they are on the same subnet as another interface. It's been a while since I have tried this, so I may be using dynamic RAM without a refresh. :-)
Consider putting each interface on a different subnet. I would turn off routing on the server to reduce the server load. Just my $0.02, which means I loose money after taxes. :-) Ken >>> "Bill Carter" 11/29/01 11:17AM >>> We are installing 2 6500's in the core. We want the Novell servers to have Gig connections to each 6500. How is this configured on the server end. I assume each card has unique IP's? Will the server get confused with 2 IP's on the same subnet? The 6500's have the MSFC2 card and is running HSRP. What are your experiences with dual homing like this? ^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^- Bill Carter CCIE 5022 "To accomplish great things, we must not only act, but also dream; not only plan, but also believe. -Anatole France ^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^- Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=27697&t=27690 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]