Howard, Thanks for the input
""Howard C. Berkowitz"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > >Hi Group, > > > >Is it possible to load balance between a 2Mb link and 1Mb link on a cisco > >router running OSPF, since they are not equal bandwidth? > >Appreciate if anyone can enlighten how we can acheive this? A quick search > >on cisoc site did not furnish much details for me. Apart from tuning the > >cost is there a good way of doing this? > > > >Thanks > > Try looking at it this way. Routing protocols do not know about load > balancing. None of them do. > > Some routing protocols can produce multiple equal cost routes. EIGRP > can make unequal cost routes look equal cost to the routing table > installation task. > > But it is the routing table manager, in conjunction with the > interface switching modes, that decides on load balancing. There is > no one best way to do load balancing, which is, in any case, only a > local optimization that will not optimize the end-to-end path. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=27775&t=27761 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]