cut and past would work, but with hundreds of devices, I'm sure you would see the point I'm trying to make.
-----Original Message----- From: Stefan Dozier [mailto:[EMAIL PROTECTED]] Sent: Friday, November 30, 2001 9:42 AM To: Andy Hoang; [EMAIL PROTECTED] Subject: RE: escape sequence other than Ctl-Shift-6(x) [7:27760] See comments inline... -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Andy Hoang Sent: Friday, November 30, 2001 11:13 AM To: [EMAIL PROTECTED] Subject: RE: escape sequence other than Ctl-Shift-6(x) [7:27760] >That means changing the escape character of the device being controlled by >the termserv. What if you have several devices on the termserv. Nothing a little foresight and a couple of cut & paste keystrokes or mouse clicks couldn't cure... >It is better to change the escape character of the termserv itself and leave >everything else as default. I won't argue that point, as I'm sure you could do it several different ways! Stefan Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=27853&t=27760 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
