Peter, Thank you for replying. Great info that the IOS image should contain "v5" feature set. ;-))
The box is an MC-3810 (not V or V3) with 32MB DRAM and 8MB flash with mc3810-is-mz.120-5.XK image. ROM: System Bootstrap, Version 12.0(6r)T4, RELEASE SOFTWARE (fc1) ROM: MC3810 Software (MC3810-WBOOT-M), Version 12.0(6r)T4, RELEASE SOFTWARE (fc1) As fas I understood reading the notes at: this box will recognize a 64MB DRAM. Am I correct? TIA -----Original Message----- From: Peter Whittle [mailto:[EMAIL PROTECTED]] Sent: sexta-feira, 30 de novembro de 2001 21:40 To: [EMAIL PROTECTED] Subject: Re: VoIP MC-3810 [7:27874] The MC-3810 supports VoIP if you have a v5 variant of the IOS. eg enterprise + voatm + voip would be mc3810-a2jsv5_122-3.bin Of course you need a voice module, AVM (analogue), BVM (ISDN Bri), DVM (ISDN Pri, CAS) and any load will do vofr. However, VoIP loads require 64 Mbytes DRAM. If you upgrade an old mc-3810 or mc-3810v you need recent BOOTROMs, take a look in the release notes for details. If your bootroms are not recent enough then a 64Mb SIMM will only show up as 16 Mb! The bootroms are a free of charge item. You will have to pay postage and may need to order them via a partner if you don't have SMARTNET on the routers. Peter In article , [EMAIL PROTECTED] writes >Just to confirm. Can a MC-3810 do VoIP or only VoFR? > >Thanks, > >Hugo >html >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > -- Peter Whittle Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=27901&t=27874 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
