It has the part# 47-4567-02 Rev AO that is later than 17-4840 rev 03
Great! :-) -----Original Message----- From: Peter Whittle [mailto:[EMAIL PROTECTED]] Sent: sabado, 1 de dezembro de 2001 07:45 To: [EMAIL PROTECTED] Subject: Re: VoIP MC-3810 [7:27874] Hugo, Your sh ver looks promising. The definitive way is to look at the BOTTOM and see if they are p.n.: 17-4840 rev 03 or later. I believe that they contain System Bootstrap Version 12.0(6r)T4. By the way the 12.0(6r)T4 is the WBOOT code that you need to support 32 Mb Flash. You will need atleast 16 Mb Flash if you want to run current enterprise feature set. If you can get by with ip plus then you can get by with your existing 8 Mb. Remember, if money is tight and you have upgraded the DRAM to 64 Mb you could always boot the IOS from a TFTP server instead of from flash, just watch out when you do a 'wr erase' to clear out the configs as it will no longer know its ip address and you will end up running the flash IOS. Peter In article , [EMAIL PROTECTED] writes >Peter, > >Thank you for replying. Great info that the IOS image should contain >"v5" feature set. ;-)) > >The box is an MC-3810 (not V or V3) with 32MB DRAM and 8MB flash with >mc3810-is-mz.120-5.XK image. > >ROM: System Bootstrap, Version 12.0(6r)T4, RELEASE SOFTWARE (fc1) >ROM: MC3810 Software (MC3810-WBOOT-M), Version 12.0(6r)T4, RELEASE >SOFTWARE (fc1) > >As fas I understood reading the notes at: > >this box will recognize a 64MB DRAM. > >Am I correct? > >TIA > > >-----Original Message----- >From: Peter Whittle [mailto:[EMAIL PROTECTED]] >Sent: sexta-feira, 30 de novembro de 2001 21:40 >To: [EMAIL PROTECTED] >Subject: Re: VoIP MC-3810 [7:27874] > > >The MC-3810 supports VoIP if you have a v5 variant of the IOS. > >eg enterprise + voatm + voip would be mc3810-a2jsv5_122-3.bin > >Of course you need a voice module, AVM (analogue), BVM (ISDN Bri), >DVM (ISDN Pri, CAS) and any load will do vofr. > > >However, VoIP loads require 64 Mbytes DRAM. > >If you upgrade an old mc-3810 or mc-3810v you need recent BOOTROMs, >take >a look in the release notes for details. If your bootroms are not >recent >enough then a 64Mb SIMM will only show up as 16 Mb! The bootroms are a >free of charge item. You will have to pay postage and may need to >order >them via a partner if you don't have SMARTNET on the routers. > >Peter > > > In article , [EMAIL PROTECTED] > writes >>Just to confirm. Can a MC-3810 do VoIP or only VoFR? >> >>Thanks, >> >>Hugo >>html >>Report misconduct and Nondisclosure violations to >[EMAIL PROTECTED] >> > -- Peter Whittle Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=28015&t=27874 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
