The good ole PPP host route generated by PPP. If you use HDLC encap it will not happpen but they you have to for go all the nice things PPP encap gies ya. You can also disable the host route genration on the BRI interface.
Raul ----- Original Message ----- From: "Bob Perez" To: Sent: Monday, December 03, 2001 12:59 PM Subject: "sh IP route" and IP question [7:27997] > I have a ISDN failover connection and whenever the connection kicks in and I > do a "show IP route" I get the following information and it is not correct. > Atlanta RTR(I did "sh ip ro")- C 128.121.22.146/32 BRI0/0 When in > actuality, the BRI int on the other router is 128.121.22.146/28 > I disconnect the ISDN and the route disappears which is what should happen > > Does anyopne know what would cause the one router to detect the wrong net > address from the other routers BRI? This is stopping me from being able to > hit the other router when the S0/0 goes down. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=28002&t=27997 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
