I have never seen any commands in the IOS that can simulate an BRI ISDN switch. Please can you submit an example config, cisco URL or a command which can do this?
Regards Thomas ""EA Louie"" schrieb im Newsbeitrag [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Is there any router simulation software that I can configure to run in a > > Frame Relay and ISDN network ? > > cisco routers have the ability to simulate Frame Relay switches. The > archives are full of examples, but www.cisco.com also has the configurations > in a number of places. try searching for "frame relay switch" > > ISDN is a little different. There are a few different solutions. One > solution is a device that has 2 ISDN BRI ports. This is known as an ISDN > Simulator, or ISDN Emulator. These usually have S/T and U interfaces, and > the cost is typically $1500, less if you shop around. Others have had > success in using a PBX with ISDN interfaces. The 2600/3600 series cisco > routers running 12.1 code has the ability to simulate ISDN BRI switching - > note that this is a more expensive solution than the ISDN Simulator > solution. see > http://groups.google.com/groups?q=john+paul+morrison&hl=en&rnum=8&selm=0ZEk7 > .131740%24B37.2967002%40news1.rdc1.bc.home.com (watch the URL wrap) > > Depending on where you live, it may also be economical for you to just order > two ISDN lines for the time that you need to study ISDN. > > good luck in your studies > -e- > "That which does not kill us only makes us stronger" - Nietzsche > > > _________________________________________________________ > Do You Yahoo!? > Get your free @yahoo.com address at http://mail.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=28218&t=27658 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
