Hi All,
I got a AS5300, when i do a "show isdn status" one of the line config
look different .
Normally i will only got "TEI = 0, Ces = 1, SAPI = 0, State =
TEI_ASSIGNED"
Now it got an extra "TEI = 0, Ces = 9, SAPI = 16, State = TEI_ASSIGNED"
May i know how can i remove this ? or how it is configure on the it?
ISDN Serial2:23 interface
******* Network side configuration *******
dsl 2, interface ISDN Switchtype = primary-net5
Layer 1 Status:
DEACTIVATED
Layer 2 Status:
TEI = 0, Ces = 1, SAPI = 0, State = TEI_ASSIGNED
TEI = 0, Ces = 9, SAPI = 16, State = TEI_ASSIGNED
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 2 CCBs = 0
The Free Channel Mask: 0x0
Number of L2 Discards = 0, L2 Session ID = 0
thanks
Chan
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=28347&t=28347
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
