does any have a script already written that I could use to run ISDN testing, I have about 900 sites that I need to test one a week and verify that their backup line is working, We currently have a script that a guy wrote a while back that is doing the testing, the problem with his script is that if a site has more than one BRI interface that it will not test correctly. The one he has will login to the router, enable ping the dialer map, see if it has two active layer three calls and make sure it stays up for at least 30 seconds, long enough to make sure there is no authentication problems, and negotiation problems, or Telco problems. If you know of a perl script that will tell you that please let me know. Also if it will tell you how much the circuit is costing you. He has a old script that will log into the headend routers, or access servers and look at the log and pull all data that shows a connection from the site, and how long it was connected, then it will calculate the cost on what our carrier is charging us for long distance. The would be useful if anyone has something that can do these and report to us.
Danny R. Rising, II CCNP, CCDA, CNE, Network+, A+ Certified 10316H Wheatside Drive Charlotte, NC 28262 [EMAIL PROTECTED] "Ability is what you're capable of doing. Motivation determines what you do. Attitude determines how well you do -Lou Holtz" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=28350&t=28350 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]