Thanks John, this makes the light a little brighter. I just need 
practice anyway, so this will do and the price aint bad... Looks like 
its time to browse over to e-bay...

Cheers!

John Kaberna wrote:

>For the cost of buying a new low-end PC you can get a 501.  So, unless you
>need multiple interfaces its not really worth it.  Plus, the 501 can run 6.x
>code and you can't with a 2MB flash card.  Unless you've got a spare PC with
>the required parts lying around your best bet is to probably spend $500
>bucks on a 501. If you do plan on building your own, there's not much more
>to it than building a skeleton PC.  That's why there isn't much more info
>about how to do it.  If you know about basic PC hardware then you can figure
>it out.
>
>John Kaberna
>CCIE #7146
>www.netcginc.com
>(415) 750-3800
>
>
>""Gaz""  wrote in message
>[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
>
>>Has anyone got more details on this please.
>>I've seen various posts but never any details. Usually they die off at the
>>expense of a flash card.
>>I've got a 520 being flash upgraded from 2Mb to 16Mb, so I wouldn't mind
>>having a play with the old 2Mb card if it's a go'er.
>>
>>Cheers,
>>
>>Gaz
>>
>>""George Murphy CCNP, CCDP""  wrote in message
>>[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
>>
>>>Thanks Geoff. I appreciate the reply. I would have never found that.....
>>>
>>>Geoff Zinderdine wrote:
>>>
>>>>""Murphy, George""  wrote in message
>>>>[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
>>>>
>>>>>Howdy Folks, I have seen some posts before about running PIX on a PC a
>>>>>"FrankenPIX" so to speak. Anyone have any references on how to do
>>>>>
>this?.
>
>>I
>>
>>>>>have a clone box to use but need to know how to steps....
>>>>>Thanks for any help......
>>>>>
>>>>Hansang Bae posted this on the lab mailing list a while back, I will
>>>>
>save
>
>>>>him the cut and paste:
>>>>
>>>>Here are the components that make up:
>>>>
>>>>        Cisco LocalDirector 430/416
>>>>        Cisco Pix Firewall  520
>>>>
>>>>     MOTHERBOARD:
>>>>        Intel Motherboard               SE440BX-2       $ 100
>>>>
>>>>     NETWORK INTERFACE:
>>>>        Intel Pro100/B 10/100 NIC       PRO100/B        $  40
>>>>                - OR -
>>>>        Osicom 4 Ethernet Port PCI      OLN-2404TX      $ 900
>>>>
>>>>     ISA FLASH CARD:
>>>>        16MB ISA Flash Card (PEP)       CISCO -         $ 700
>>>>                - OR -
>>>>        4MB  ISA Flash Card (??)        ??              $ --?
>>>>
>>>>hsb




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=28513&t=28342
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to