You could also have a modem attached to the remote router and while you are dialed in you can change the IP address. Then change the ip address on the host end after that. At least if you miss typed the ip address you would still be dialed into the router to change it instead of rebooting the router. Also make sure you do a wr mem and wr net before you make this change just in case.
-----Original Message----- From: MADMAN [mailto:[EMAIL PROTECTED]] Sent: Monday, December 10, 2001 8:54 AM To: [EMAIL PROTECTED] Subject: Re: how to change the serial port IP of remote end [7:28665] telnet to remote router, CAREFULLY change ip address. As soon as you hit enter, connection lost. Config local side, everything is good. If you screw up simply have someone power cycle remote and your back were you started. Dave Rajneesh Yadav wrote: > > Hi all, > > I want to change serial IP of my both the router one is placed in UK.so my > question is,can i change it remotely and how its possible.please if anyboby > can help me out. > > Regards > > Rajneesh -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=28688&t=28665 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
