Well, I figured it out. I was waiting for some type of prompt to let me know when to start the file transfer and then figured that I had three seconds to start it. Apparently, as soon as you hit the "Enter" key to execute the " switch: copy xmodem: flash:c3500XL-c3h2s-mz.120-5.3.WC.1.bin" command, you have about three seconds to start the file transfer. Sorry for the false alarm.
Shawn > -----Original Message----- > From: Kaminski, Shawn G > Sent: Monday, December 10, 2001 4:00 PM > To: 'Groupstudy' > Subject: Xmodem Failure Help > > First of all, the archive search feature isn't working correctly. I did a > search for "xmodem" and got zero matches, which I found odd. So, I then > did a search on "cisco" to check if it was working and also received zero > matches! Paul, please check this out. > > I am unable to xmodem a new flash image to replace a corrupted image on a > 3508XL switch. The switch boots right into boot loader mode (switch:) and > I have followed the directions on Cisco's website. Can someone please tell > me why I'm getting the following? If you need more info., let me know. > > switch: copy xmodem: flash:c3500XL-c3h2s-mz.120-5.3.WC.1.bin > Begin the Xmodem or Xmodem-1K transfer now... > CCCCCCCCCCBB0BB0xmodem:: I/O error Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=28748&t=28748 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
