Are you talking DS3 ATM or T3, I assuming not HSSI. Then what else are you doing? You can get this connectivity in the form of an ATM NM-1A-T3 (3600, 2600 series) or PA's, PA-A3-T3, PA-T3 (7200, 7500, 7100, 7400). Look on CCO for more info on these to see if they fit your requirements. None of these require external CSU, this is good:)
Dave David Titov wrote: > > Does anyone have any suggestions on what type of equipment would be necessary > for a point-to-point DS3. This would be between my corporate office and my > Co-location facility. > > Router, Modules, Ram, CSU/DSU etc. > Thanks, > > Dave -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=28937&t=28915 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]