Excuse me, I found it here: Loading Cisco IOS Release 11.2 Software on CiscoPro Routers
The Router Software Loader contains an upgrade utility that permanently modifies a CiscoPro router so that it will accept the Cisco IOS Release 11.2 software images. -----Original Message----- From: Hugo Caye Sent: quarta-feira, 12 de dezembro de 2001 20:01 To: Lista Cisco GroupStudy (E-mail) Subject: Cisco CPA 2501 Will the Cisco CPA 2500 line run the "normal" IOS images? I need the Policy-Based Routing (PBR) feature. PBR needs at least 11.2(1) and an upgrade to 4MB flash in my hardware. The CPA line seems a "fake" Cisco box, because of its external color... beige. My actual CPA box has the below "sh ver". Any sugestion are welcome. TIA, Hugo ===================================================== Show running: Cisco Internetwork Operating System Software IOS (tm) 3000 Software (CPA25-Y-L), Version 11.0(6), RELEASE SOFTWARE (fc1) Copyright (c) 1986-1996 by cisco Systems, Inc. Compiled Thu 21-Mar-96 00:34 by hochan Image text-base: 0x03018CA8, data-base: 0x00001000 ROM: System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE ROM: 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(8a), RELEASE SOFTWARE (fc1) Router uptime is 3 hours, 36 minutes System restarted by bus error at PC 0x3167468, address 0x4E0FA3FF System image file is "flash:cpa25-y-l.110-6", booted via flash cisco CPA2500 (68030) processor (revision L) with 2048K/2048K bytes of memory. Processor board ID 02790397, with hardware revision 00000000 Bridging software. X.25 software, Version 2.0, NET2, BFE and GOSIP compliant. Primary Rate ISDN software, Version 1.0. Authorized for CiscoPro software set only. 1 Ethernet/IEEE 802.3 interface. 2 Serial network interfaces. 32K bytes of non-volatile configuration memory. 4096K bytes of processor board System flash (Read ONLY) Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=28981&t=28981 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]