Years ago when Cisco first sold equipment through distribution channels they created the CiscoPro line. To "Cisco-ize" the box so that it will accept regular IOS images you need to run a small utility. If you have CCO login access it can be found in the Software Center: http://www.cisco.com/cgi-bin/Software/Tablebuild/tablebuild.pl/rsl
> -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, December 12, 2001 4:00 PM > To: [EMAIL PROTECTED] > Subject: Cisco CPA 2501 [7:28976] > > > Will the Cisco CPA 2500 line run the "normal" IOS images? I need the > Policy-Based Routing (PBR) feature. PBR needs at least 11.2(1) and an > upgrade to 4MB flash in my hardware. > > The CPA line seems a "fake" Cisco box, because of its external > color... beige. > > My actual CPA box has the below "sh ver". > > Any sugestion are welcome. > > TIA, > > Hugo > > ===================================================== > > Show running: > Cisco Internetwork Operating System Software > IOS (tm) 3000 Software (CPA25-Y-L), Version 11.0(6), RELEASE SOFTWARE > (fc1) > Copyright (c) 1986-1996 by cisco Systems, Inc. > Compiled Thu 21-Mar-96 00:34 by hochan > Image text-base: 0x03018CA8, data-base: 0x00001000 > > ROM: System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE > ROM: 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(8a), RELEASE > SOFTWARE (fc1) > > Router uptime is 3 hours, 36 minutes > System restarted by bus error at PC 0x3167468, address 0x4E0FA3FF > System image file is "flash:cpa25-y-l.110-6", booted via flash > > cisco CPA2500 (68030) processor (revision L) with 2048K/2048K bytes of > memory. > Processor board ID 02790397, with hardware revision 00000000 > Bridging software. > X.25 software, Version 2.0, NET2, BFE and GOSIP compliant. > Primary Rate ISDN software, Version 1.0. > Authorized for CiscoPro software set only. > 1 Ethernet/IEEE 802.3 interface. > 2 Serial network interfaces. > 32K bytes of non-volatile configuration memory. > 4096K bytes of processor board System flash (Read ONLY) Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=28984&t=28976 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
