We use the following config to hookup with a Sportster: line aux 0 modem InOut transport preferred none transport input all stopbits 1 rxspeed 9600 txspeed 9600 flowcontrol hardware
Modem dip switch settings: 5,6,8 - UP, the rest down HTH, Chris -----Original Message----- From: A.Steinbock [mailto:[EMAIL PROTECTED]] Sent: Sunday, December 16, 2001 1:20 AM To: [EMAIL PROTECTED] Subject: Conneitng to a router's AUX port [7:29323] I am connecting to the aux port of my router through a dialup modem. When the aux port is connected to a Hayes modem, everything works fine. When I use a USrobotics Sportster modem the line keeps on ringing with no answer. Does anyone know why this could happen and what command shoudl I send to the modem to make it behave? TIA Akim ____________________________________________________________________ Get free e-mail and a permanent address at http://www.amexmail.com/?A=1 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=29326&t=29323 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]