hmm, must be standards not RFCs. today I was asking en passant and was told one can teach the routers to behave like nice switches with some "connect" commands
""Chuck Larrieu"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > do RFC's cover how frame switches behave? > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > Georg Naggies > Sent: Saturday, December 15, 2001 8:55 PM > To: [EMAIL PROTECTED] > Subject: Re: Frame relay traffic shaping problem [7:28590] > > > Can it be that Cisco Routers acting as FR switches never do... > AFAIR they are just not fully RFC compliant. > > > Tom Gardiner wrote: > > > Folks, > > > > Would any of you folks have references to working scenarious demonstrating > > frame relay qos. I have been tearing by hair out to make my switch mark > > packets with Becns without success, no matter how much I choke the pipe. > I > > am sure I am missing something basic. I have included some of my configs, > > if anyone cares to critique > > > > Thanks > > > > Tom Gardiner > > > > Router_4#sh frame-relay pvc > > > > PVC Statistics for interface Serial0/1 (Frame Relay DTE) > > > > Active Inactive Deleted Static > > Local 1 0 0 0 > > Switched 0 0 0 0 > > Unused 0 0 0 0 > > > > DLCI = 104, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0/1 > > > > input pkts 43364 output pkts 45110 in bytes 35435312 > > out bytes 40742346 dropped pkts 0 in FECN pkts 0 > > in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 > > in DE pkts 0 out DE pkts 0 > > out bcast pkts 0 out bcast bytes 0 > > Shaping adapts to BECN > > pvc create time 02:07:12, last time pvc status changed 02:07:12 > > Router_4#sh frame-relay pvc > > > > PVC Statistics for interface Serial0/1 (Frame Relay DTE) > > > > Active Inactive Deleted Static > > Local 1 0 0 0 > > Switched 0 0 0 0 > > Unused 0 0 0 0 > > > > DLCI = 104, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0/1 > > > > input pkts 43418 output pkts 45176 in bytes 35443159 > > out bytes 40746686 dropped pkts 0 in FECN pkts 0 > > in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 > > in DE pkts 0 out DE pkts 0 > > out bcast pkts 0 out bcast bytes 0 > > Shaping adapts to BECN > > pvc create time 02:07:45, last time pvc status changed 02:07:45 > > > > ===================================================================== > > Switch config > > > > Router_4# > > > > hostname Router_6 > > ! > > logging rate-limit console 10 except errors > > ! > > ip subnet-zero > > no ip finger > > no ip domain-lookup > > ! > > no ip dhcp-client network-discovery > > frame-relay switching > > ! > > ! > > ! > > ! > > interface Ethernet0 > > ip address 10.1.1.200 255.255.255.0 > > no ip route-cache > > no ip mroute-cache > > ! > > interface Serial0 > > no ip address > > encapsulation frame-relay > > no ip route-cache > > no ip mroute-cache > > logging event subif-link-status > > logging event dlci-status-change > > no fair-queue > > clockrate 4000000 > > frame-relay traffic-shaping > > frame-relay interface-dlci 401 switched > > class s0 > > frame-relay intf-type dce > > frame-relay policing > > frame-relay congestion-management > > ! > > interface Serial1 > > no ip address > > encapsulation frame-relay > > no ip route-cache > > no ip mroute-cache > > logging event subif-link-status > > logging event dlci-status-change > > no fair-queue > > frame-relay traffic-shaping > > frame-relay interface-dlci 104 switched > > class s1 > > frame-relay intf-type dce > > frame-relay policing > > frame-relay congestion-management > > ! > > ip kerberos source-interface any > > ip classless > > no ip http server > > ! > > ! > > map-class frame-relay s0 > > frame-relay cir 4000000 > > frame-relay mincir 2000000 > > frame-relay holdq 10 > > frame-relay adaptive-shaping becn > > ! > > map-class frame-relay s1 > > frame-relay cir 2000 > > frame-relay mincir 1000 > > frame-relay holdq 10 > > frame-relay adaptive-shaping becn > > connect s0 Serial0 401 Serial1 104 > > ! > > ! > > ! > > ====================================================================== > > > > typical frame relay client > > > > Building configuration... > > > > Current configuration: > > ! > > version 11.3 > > no service pad > > service timestamps debug uptime > > service timestamps log uptime > > no service password-encryption > > ! > > hostname Router_2 > > ! > > ! > > username Router_5 password 0 ipexpert > > ip subnet-zero > > no ip finger > > no ip domain-lookup > > isdn switch-type basic-ni > > ! > > ! > > process-max-time 200 > > ! > > interface Loopback0 > > ip address 200.0.0.2 255.255.255.0 > > ! > > interface Ethernet0 > > description connected to Cisco1538 > > ip address 10.1.1.211 255.255.255.0 > > ! > > interface Serial0 > > ip address 20.1.1.2 255.255.255.0 > > encapsulation frame-relay > > no ip route-cache > > no ip mroute-cache > > no fair-queue > > frame-relay traffic-shaping > > frame-relay class becn > > ! > > interface Serial1 > > ip address 20.1.1.2 255.255.255.0 > > clockrate 1000000 > > ! > > ip classless > > ip route 30.1.1.0 255.255.255.0 20.1.1.4 > > ! > > ! > > map-class frame-relay becn > > frame-relay cir 4000000 > > frame-relay bc 25000 > > frame-relay be 0 > > frame-relay mincir 2000000 > > frame-relay adaptive-shaping becn Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=29394&t=28590 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]