Funny you mention that. I'm not seeing that particular problem but I have a couple of customers who have seen some strange messages and I cannot find any useful docs on %SYS-SP- or %OIR-SP-, the key here is ANY error messages with -SP-. Hate opening cases cause I can't find simple info but...
Dave Michael Williams wrote: > > I had a Cat6500 setup in the basement and was using for testing on various > things. We moved it up into our Data Center. I wiped NVRAM on both Sup > engines (separately), and not it's booted up and running on the Sup in slot > 2 (with the Sup in slot 1 (supposedly) in standby mode). > > >From the console, I get this repeating error message: > > %C6KPWR-SP-4-DISABLED: power to module in slot 1 is set off (admin reque) > > I never received this message the entire time I was using in the basement. > I'm going to go and shut it down, yank the two Sups and reseat them just to > make sure they're okay.... Just curious to see if there was any specific > cause for this message. I searched Cisco's site to no avail. > > Thanks! > Mike W. -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=29432&t=29411 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
