Assuming the NTU is managed by you (and not the telco), you should be able to set up a loop on the serial line by changing a setting on the NTU. It should give you the option to set up a loopback facing the WAN or facing the DTE (your router). Look at the documentation for your NTU.
"Sim, CT (Chee Tong)" wrote: > Hi.. My HQ asked me to "put a loop on the serial link", the serial link is > currently connected from a router to a NTU with a V35 cable, may I know how > to do it without getting a loop back connector? > > > > -----Original Message----- > From: Joachim Bdr [mailto:[EMAIL PROTECTED]] > Sent: Tuesday, December 18, 2001 10:11 PM > To: [EMAIL PROTECTED] > Subject: AW: SDSL [7:29464] > > Hi, > > no the cisco 800 series supports g.shdsl but not sdsl. > Sdsl has an outher line coding and it isn't a standard like g.shdsl. > > Best regards > J. Baer > -----Urspr|ngliche Nachricht----- > Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] > Gesendet: Dienstag, 18. Dezember 2001 13:51 > An: [EMAIL PROTECTED] > Betreff: SDSL [7:29464] > > Hi! > > My company is considering using DSL for communication. > My knowledge in this area is somewhat minimal :) > > I have found the cisco 633 that supports sdsl. > > But I really need something that can do both sdsl, hdsl, vdsl and adsl. > Cisco 800-series seems to support adsl at least, my question > is if the 800 also can do sdsl? > > Best regards, Johan Ericsson > ================================================================== > De informatie opgenomen in dit bericht kan vertrouwelijk zijn en > is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht > onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en > de afzender direct te informeren door het bericht te retourneren. > ================================================================== > The information contained in this message may be confidential > and is intended to be exclusively for the addressee. Should you > receive this message unintentionally, please do not use the contents > herein and notify the sender immediately by return e-mail. > > ================================================================== Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=29492&t=29470 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]