my quick mockup as follows: R7---R8
R7 is Parkhurst's router A R8 is Parkhurst's router B R7 config R7#sr bgp router bgp 1 bgp log-neighbor-changes network 144.223.8.0 mask 255.255.255.0 network 156.26.32.0 mask 255.255.255.0 neighbor 10.1.1.2 remote-as 2 neighbor 10.1.1.2 advertise-map secondary non-exist-map primary ! ip classless ip default-network 10.0.0.0 no ip http server ! access-list 1 permit 156.26.32.0 0.0.0.255 access-list 2 permit 144.223.8.0 0.0.0.255 route-map primary permit 10 match ip address 1 ! route-map ospf-igrp-default permit 10 set interface TokenRing0 ! route-map secondary permit 10 match ip address 2 ! R7#b BGP table version is 6, local router ID is 10.1.1.1 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal Origin codes: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path *> 144.223.8.0/24 0.0.0.0 0 32768 i *> 156.26.32.0/24 0.0.0.0 0 32768 i *> 172.16.2.0/24 10.1.1.2 0 0 2 i *> 172.16.3.0/24 10.1.1.2 0 0 2 i R7# R8#b BGP table version is 6, local router ID is 172.16.3.1 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal Origin codes: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path *> 156.26.32.0/24 10.1.1.1 0 0 1 i *> 172.16.2.0/24 0.0.0.0 0 32768 i *> 172.16.3.0/24 0.0.0.0 0 32768 i R8# So far all is according to plan Now, shut down R7 primary loopback R7# 00:34:48: %SYS-5-CONFIG_I: Configured from console by consoleb BGP table version is 7, local router ID is 10.1.1.1 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal Origin codes: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path *> 144.223.8.0/24 0.0.0.0 0 32768 i *> 172.16.2.0/24 10.1.1.2 0 0 2 i *> 172.16.3.0/24 10.1.1.2 0 0 2 i R7# and R8 show the proper information: R8#b BGP table version is 8, local router ID is 172.16.3.1 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal Origin codes: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path *> 144.223.8.0/24 10.1.1.1 0 0 1 i *> 172.16.2.0/24 0.0.0.0 0 32768 i *> 172.16.3.0/24 0.0.0.0 0 32768 i R8# I notice ther is an error in the book in access-list 1 - did you correct that? Chuck ""Kane, Christopher A."" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > All/Chuck > > Wrapping up my BGP studies and using Parkhurst's BGP book to lab some stuff. > The first lab in Chapter 8 (advertise-map) is not working for me. The routes > advertise fine until I get to the step of shutting int loopback 0. rtrA > retains the secondary route but rtrB is not receiving that route. All of my > results follow the examples until this point. I've tried the lab several > times and my configs are correct. If anyone has had any luck with this lab > or if you could throw it together real quick, I'd appreciate it. It only > requires 2 routers and a fairly simple config. > > My sanity may be at stake. t?t > > Thanks > Chris Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=30124&t=30115 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
