I seem to be having a problem with a very simple NLSP setup across an HDLC serial link. For some reason I don't get any adjacencies no matter what I do. Debugs are showing one of the routers not receiving the others NLSP IIH packets. Please let me know if you have any ideas...thx!
----- IOS Version: 12.1.9 Enterprise on both routers What works: -IP and IPX across the link (small pings, large pings, and anything else) -IP routing (any sort) -IPX RIP routing (haven't tried EIGRP yet) What I have tried: -New serial cable -Different serial ports on same routers -IPXWAN -encapsulation ppp -More precise area definitions -Different internal #'s -Power cycling routers -Different clock rates ----- Router 1: ipx routing 0000.0000.0001 ipx internal-network 100000 ! interface Serial0 ip address 192.168.21.2 255.255.255.0 ipx network 12 ipx nlsp enable no fair-queue ! ipx router nlsp area-address 0 0 log-adjacency-changes ! ipx router rip no network 12 ------ Router 2: ipx routing 0000.0000.0002 ipx internal-network 200000 ! interface Serial0 ip address 192.168.21.1 255.255.255.0 ipx network 12 ipx nlsp enable no fair-queue clockrate 64000 ! ipx router nlsp area-address 0 0 log-adjacency-changes ! ipx router rip no network 12 ------ Debug ipx nlsp adj on Router 1 (Repeats approx. every 10 seconds): 01:38:02: NLSP-Adj: Sending serial IIH on Serial0, length 36 ------ Debug ipx nlsp adj on Router 2 (Repeats approx. every 10 seconds): 01:36:16: NLSP-Adj: Sending serial IIH on Serial0, length 36 01:36:17: NLSP-Adj: Rec serial IIH from *HDLC* (Serial0), cir type L1, cir id 03, length 36 01:36:17: NLSP-Adj: old state INIT, new state INIT Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=30206&t=30206 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
