At 01:56 PM 12/27/01, Brant Stevens wrote: >I may be wrong, but what is your IPX network encapsulation type?
Encapsulation wouldn't be an issue on a serial link. It could be an issue on an Ethernet network since there are 4 possible encapsulations. But on his serial link, he's using HDLC encapsulation. There's no issue there. My vote would be with the other answer we heard this morning. You need ipxwan on a serial interface. Priscilla >----- Original Message ----- >From: "Scott Meeuwsen" >To: >Sent: Thursday, December 27, 2001 12:55 PM >Subject: Basic NLSP problem... [7:30206] > > > > I seem to be having a problem with a very simple NLSP setup across an HDLC > > serial link. For some reason I don't get any adjacencies no matter what I > > do. Debugs are showing one of the routers not receiving the others NLSP >IIH > > packets. Please let me know if you have any ideas...thx! > > > > ----- > > > > IOS Version: 12.1.9 Enterprise on both routers > > > > What works: > > -IP and IPX across the link (small pings, large pings, and anything else) > > -IP routing (any sort) > > -IPX RIP routing (haven't tried EIGRP yet) > > > > What I have tried: > > -New serial cable > > -Different serial ports on same routers > > -IPXWAN > > -encapsulation ppp > > -More precise area definitions > > -Different internal #'s > > -Power cycling routers > > -Different clock rates > > > > ----- > > > > Router 1: > > > > ipx routing 0000.0000.0001 > > ipx internal-network 100000 > > ! > > interface Serial0 > > ip address 192.168.21.2 255.255.255.0 > > ipx network 12 > > ipx nlsp enable > > no fair-queue > > ! > > ipx router nlsp > > area-address 0 0 > > log-adjacency-changes > > ! > > ipx router rip > > no network 12 > > > > ------ > > > > Router 2: > > > > ipx routing 0000.0000.0002 > > ipx internal-network 200000 > > ! > > interface Serial0 > > ip address 192.168.21.1 255.255.255.0 > > ipx network 12 > > ipx nlsp enable > > no fair-queue > > clockrate 64000 > > ! > > ipx router nlsp > > area-address 0 0 > > log-adjacency-changes > > ! > > ipx router rip > > no network 12 > > > > ------ > > > > Debug ipx nlsp adj on Router 1 (Repeats approx. every 10 seconds): > > > > 01:38:02: NLSP-Adj: Sending serial IIH on Serial0, length 36 > > > > ------ > > > > Debug ipx nlsp adj on Router 2 (Repeats approx. every 10 seconds): > > > > 01:36:16: NLSP-Adj: Sending serial IIH on Serial0, length 36 > > 01:36:17: NLSP-Adj: Rec serial IIH from *HDLC* (Serial0), cir type L1, cir > > id 03, length 36 > > 01:36:17: NLSP-Adj: old state INIT, new state INIT ________________________ Priscilla Oppenheimer http://www.priscilla.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=30226&t=30206 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
