Your not plugging it in hot are you?!?!?! Dave
Richard Tufaro wrote: > > Hey guys, iv got an 3640 running IOS 12.0(9). When I plugged in my WIC-DSU I > got this error in my Syslog Log. > > %QUICC-1-UNEXPECTED_INTERRUPT: Quicc(1), Unexpected modem-signal interrupt > Cisco does not have a good explanation of it, and basically tells you to > contact support. I don't have support on this router and was wondering if > anyone has ran across this problem before. Any help would be appreciated. > Thanks. > http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122sup/122sems/semsvol2/emfpquic.htm > Error Message > %QUICC-1-UNEXPECTED_INTERRUPT: Quicc([dec]), Unexpected modem-signal > interrupt > Explanation The software did not expect a modem control signal change on > this type of WIC interface. > Recommended Action Copy the error message exactly as it appears on the > console or in the system log, contact your Cisco technical support > representative, and provide the representative with the gathered information. -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=30303&t=30298 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]