Thanks Nick but I am using Win2K server authentication , and not the Radius server or any ACS server , how should I go about then ?
I am now able to get the establish the connection and the tunnel is created as well and I am getting the following message as well : 4# r4# r4#sh vpdn %No active L2TP tunnels %No active L2F tunnels PPTP Tunnel and Session Information Total tunnels 1 sessions 1 LocID Remote Name State Remote Address Port Sessions 5 estabd 202.157.71.47 1120 1 LocID RemID TunID Intf Username State Last Chg 5 49152 5 Vi1 technosys\adm estabd 00:26:29 %No active PPPoE tunnels r4# but I am still now able to come in to the Win2K domain . Do guide me what I should do . thanks, Navin Parwal ""Nick S."" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > sorry about the cryptic msg. earlier, i realised that there were a few more > errors in the config as well.. > > * use aaa and specify local authentication (you can use radius or tacacs) > * specify terminate-from hostname (NAS) local name (HGW) > > Rest all seems to be ok... > > On the router, turn debug vpdn error , debug vpdn event on, and turn the > debugs on authentication as well. That will point to where its failing. > > Nick Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=30430&t=30415 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
