Hi, It is genral knowledge that a PIX firewall can not be telneted into from the outside interface, however some documentations am reviewing recently seem to say the opposite. If you workstation IP address is eg 216.72.211.12, try the command below:
PIX(config)#Telnet 216.72.211.12 255.255.255.255 outside See whether it will sought out your problem. Regards. Oletu ----- Original Message ----- From: ietobe To: Sent: Friday, December 28, 2001 9:28 PM Subject: Telnet to PIX from outside interface [7:30413] > Hi,Guy > Can anybody tell me how to allow telnet from outside network on PIX? > > Tks > > Gabriel _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=30457&t=30413 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]