I'm a bit confused on the the following IRB commands: In Caslow (p612), it gives the following IRB config example:
(Config)# bridge irb (Config)# interface bvi 1 (Config)# bridge 1 bridge ipx But I thought the whole purpose of BVI is to route packets from the Bridge group to the BVI itself, and then the BVI will forward the packet to the outbound routed interface, so shouldn't the last command be: (Config)# bridge 1 route ipx Any help will be greatly appreciated. Best Regards, Hunt Lee IP Solution Analyst Cable & Wireless Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=30574&t=30574 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
