You're not wrong, spotted the previous mistake, you just missed off an address. That's a nice way of putting it eh?
Changing your second line to Permit 10.10.10.48 0.0.0.1 will do the trick because it allows 48 and 49 through. Regards, Gaz ""Shengtao"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > I think "Permit 10.10.10.40 0.0.0.7" will allow 40-47, and you need another > statement " Permit 10.10.10.48 0.0.0.0" to allow 48 to get through. > > Am I worng? > > > ""Godswill HO"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Hi, > > > > Try the following: > > > > IP access-list standard allowed > > Permit 10.10.10.40 0.0.0.7 > > Permit 10.10.10.49 0.0.0.0 > > > > The first permit statement allow addresses n.n.n.40 to n.n.n.48, while the > > last one allow address n.n.n.49. There is no way you can deny whole range > > without affecting other addresses with one single statement. > > > > When appliying it to your interface say: > > > > Router(config-if)#IP access-group allowed in > > > > Regards. > > Oletu > > > > ----- Original Message ----- > > From: Hunt Lee > > To: > > Sent: Friday, January 04, 2002 9:29 PM > > Subject: Access-List questions [7:31001] > > > > > > > Hello there, > > > > > > I need some help on Access-Lists: > > > > > > Say if I want to permit network access to only 10.10.10.1 - 10.10.10.254 > > > > > > I know you can simply use: > > > > > > Access-list 10 permit 10.10.10.0 0.0.0.255 > > > > > > However, if I want to only permit the range of 10.10.10.40 to > 10.10.10.49 > > > (inclusive), then what should I do? > > > > > > Any help is greatly appreciated. > > > > > > Best Regards, > > > Hunt Lee > > > IP Solution Analyst > > > Cable & Wireless > > _________________________________________________________ > > Do You Yahoo!? > > Get your free @yahoo.com address at http://mail.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=31021&t=31001 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]