Hi all, I tried to install two new 8MB flash to my 4500 router. When the router booted up, observed following error message :
% Invalid chip id 0xFFFF detected in System flash. Setting System flash access to READ-ONLY. Other than that the router was able to boot to 'router (boot) >' prompt. I entered 'copy tftp flash' command, got following message: Address or name of remote host [192.168.0.10]? Name of file to copy? c4500-a3js56i-mz_121-9.bin Copy c4500-a3js56i-mz_121-9.bin from 192.168.0.10? [confirm] Checking for file 'c4500-a3js56i-mz_121-9.bin' on 192.168.0.10... [OK] dev_iopen: System flash not writable. - Was this because of wrong type of flash ? - How can I change the flash to 'Writable' ? Thanks in advance for any feedback. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=31042&t=31042 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]