Set port speed and duplex manually rather than leaving it to auto negotiate. This is very common problem on all cisco switches.
-Keyur Shah- CCIE# 4799 (Security; Routing and Switching) css1,ccna,ccda,scsa,scna,mct,mcse,mcp+i,mcp,cni,mcne,cne,cna Hello Computers "Say Hello to Your Future!" http://www.hellocomputers.com Toll-Free: 1.877.794.3556 Fremont: 510.795.6815 Santa Clara: 408.496.0801 Europe: +(44)20 7900 3011 Fax: 510.291.2250 -----Original Message----- From: Ali, Abbas [mailto:[EMAIL PROTECTED]] Sent: Monday, January 07, 2002 10:40 PM To: [EMAIL PROTECTED] Subject: 6509 switch [7:31251] I am receiving lot of errors on my Ethernet Line Cards in 6509 switch. For example, Ports have different errors in FCS, CRC, Runts, Giants, and Collisions. Is it possible to narrow down whether it could be NIC Card, Bad Cable, auto negotiation etc? One of the users has a brand new computer and cable, but I am still showing the port he is connected to has lots of FCS, and collisions as well as runt frame. any help would be appreciated. Regards, Ali Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=31414&t=31251 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]