>From Cisco's web site, it doesn't look like the WIC-2T is supported in the NM-1E2W. The doc on the WIC-2T only lists the following:
NM-1FE1R2W NM-1FE2W NM-2FE2W NM-2W The same doc says that the WIC-2T isn't supported in the following: Cisco 1600 NM-1E2W NM-1E1R2W NM-2E2W Sorry. -----Original Message----- From: tmjf.com [mailto:[EMAIL PROTECTED]] Sent: Tuesday, January 15, 2002 4:28 AM To: [EMAIL PROTECTED] Subject: Help !! 3620 + NM-1E2W + WIC-2T = trouble [7:31976] I have a 3620 with 64 MB RAM 16 MB Flash. I installed module NM-1E2W and it works fine, but when I install the WIC-2T in either WAN slots it doesn't recognize it. The WIC-2T works on my 1720 and 2610. I've tried 2 different IOS already (IOS 12.2 Enterprise Plus IPSec 56 and 12.1 IP Plus IPSEC 56). Any input will be appreciated. Thanks! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=31981&t=31976 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
