The MC3810 does support VoIP. To do so, you must have an "IP Plus" IOS image, along with the associated NetModules for connectivity to whatever you're terminating with. For your specific application, I think you might be looking for a T1-MultiFlex Trunk. Do a search on Cisco.com a.k.a. CCO and see if that is what you're looking for.
Good Luck, and Have fun!! Mark Odette II -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Christian Arguello Sent: Tuesday, January 15, 2002 10:02 AM To: [EMAIL PROTECTED] Subject: CISCO MC3810 [7:32007] Hi Does any body lnow if CISCO mc3810 support voip using h323 protocol, if so, with wich IOS does Cisco mc3810 works with VoIP. what do i have to do to make tha a CISCO mc3810 works as a gateway in VoIP, i mean that my CISCO must be a bridge between PSTN and the IP Cloud. Regards Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=32020&t=32007 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
