Pieter, I would check out the hardware information on CCO about the differences between the 2 switches. I do know that the switching matrix is better on the 2950's and you can actually achieve full line speed on the ports, and there are a few other specs that are different than the 2900's but I can't think of what they are off the top of my head. Anyways. HTH.... :o)
- jek "Pieter Jordaan" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi > > I have a cisco 2924 switch connected to a 6509, the port is configured as a > trunk. when I use ISL encaptulation between the switches I get a lot of > giant frames, and when I use dot1q I get a lot of runts. > > If I replace the switch with a 2950 (which only supports dot1q) I dont get > any runts or giants and all works well. I am experiencing this behaviour on > 30 + 2900XL switches but not on any of my 2950's > > Any Idea what could be happening here? > > Thanks Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=32391&t=32281 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]