On my AS 5400, NAT doesn't work .....the IOS version is 12.1 (5) T5....does this IOS version have same problems with NAT like IOS 12.2(5).????
plz advise komy ""Kaminski, Shawn G"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > In case anybody is interested, I submitted the post below regarding NAT > problems with IOS 12.2(5). The Cisco TAC engineer wrote back with the > following information, which matches up with the problems we were having: > > "A search was done on the known issues on 12.2 IOS platform and I got two > bugs similar to your issue. I am just wondering whether you are running > into these issues. > > CSCdv40492 - NAT stops working after some days > > and the same is duplicated by the following bug also: > > CSCdr69168 - It seems that router using same port number 65535. After that, > some connections will be down or fail. Workaround is to reload the router. > If they try to do "clear ip nat trans *", it still has this problem. > > The above two bugs are resolved in the following IOS versions. > 12.2(06.06)T > 12.2(06.08)DA > 12.2(06.06)PI > 12.002(006.005) > > I would suggest you to consult with your NSA engineer for your account for > appropriate code recommendation." > > > Shawn K. > > > -----Original Message----- > From: Kaminski, Shawn G [mailto:[EMAIL PROTECTED]] > Sent: Monday, January 14, 2002 3:33 PM > To: [EMAIL PROTECTED] > Subject: NAT Problems with 12.2(5)? RE: Gawd I hate my life [7:31883] > > > Regarding IOS's, has anyone had any problems with NAT when using 12.2(5)? > Without going into details, we're having some NAT issues and it seems to > have started after upgrading our routers to 12.2(5). CCO doesn't currently > show any NAT problems or bugs with this version. > > Shawn K. > > -----Original Message----- > From: Brad Ellis [mailto:[EMAIL PROTECTED]] > Sent: Monday, January 14, 2002 11:29 AM > To: [EMAIL PROTECTED] > Subject: Re: Gawd I hate my life ;-> [7:31817] > > > snip > > Cisco Internetwork Operating System Software > > IOS (tm) 3600 Software (C3620-JS56I-M), Version 12.1(5)T10, RELEASE > > SOFTWARE (f > snip > > dont use IOS 12.(5)T10. you folks you should be using 12.(5)T9, it has less > bugs in it. > > thanks, > -Brad Ellis > CCIE#5796 (R&S / Security) > Network Learning Inc > [EMAIL PROTECTED] > used Cisco gear: www.optsys.net > CCIE Labs, racks, and classes: http://www.ccbootcamp.com/quicklinks.html > ""Chuck Larrieu"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > OK, so I've been doing rack testing for some people who are going to > > be going public Real Soon Now. > > > > Got some things mocked up. Some of which relate to topics discussed on > this > > forum yesterday and today. I need to check something and issue the > > command "show ip prot" enter. > > > > r2#sh ip prot > > % Ambiguous command: "sh ip prot" > > r2# > > > > well, now... > > > > r2#show ip prot? > > protocol-discovery protocols > > > > r2#show ip prot > > > > so what is "show ip protocol-discovery? > > > > r2#sh ip protocol-discovery ? > > interface Show for a specific interface > > protocol Show stats about a pariticula protocol > > stats Show Stats > > top-n Show Top-N protocols by bytes > > | Output modifiers > > > > > > OK. so a command I've been using since 11.2 is no longer valid. except > that > > it is on other routers. > > > > but look - still good on other routers: > > > > r3#sh ip prot? > > protocols > > > > r3#sh ip prot > > > > > > OK, check CCO, no record of any such command as show ip > > protocol-discovery in any command reference I check. A search of CCO > > for the phrase reveals nothing. > > > > now what? > > > > the IOS version in question is: > > > > r2#sh ver > > Cisco Internetwork Operating System Software > > IOS (tm) 3600 Software (C3620-JS56I-M), Version 12.1(5)T10, RELEASE > > SOFTWARE (f > > c2) > > > > sigh. have not run into this before, not in two trips through the lab, > > not on any number of routers and IOS versions, both at home and in > > customer installations. > > > > Anyone got any clue what show IP protocol-discovery does? > > > > sheesh.. another good shortcut down the tubes. > > > > Chuck Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=32793&t=32357 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]