>From "s vermill"
<<Subject: RE: question [7:33012] <<Assuming these are Cisco routers with current IOS... << router#erase start <<This returns you to factory default. The routers will have no IP addresses, <<no routing protocols, no nuthin. They will not talk to one another. <<If you are just looking to clean the files up, you need to do some research <<on CCO (www.cisco.com) in order to determine what each line means. This is <<by no means a minor undertaking. Maybe you need to hire a consultant. I'm rather new to this cisco router technology -- taking a class in it at the local community college with the hope of moving up from desktop tech/helpdesk to network engineering. However, our class in basic router tech just covered this topic, so I feel I can add something constructive. What we've been taught to do to "zero out" a router is to get a text copy of a clean router configuation and use it to reset the router by pasting the data into a telnet app and sending it from there. So, if you can get a copy of the router's original configuration, you can use it to reload the baseline configuation after doing the Router# erase start command. This can be done from the global config level of the IOS. Hope this helped. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=33042&t=33012 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]