thank you , looks useful can I still use the other WIC port to run another link
if that WIC port is not the one on the NM-2W but the one that comes with the 2600 chasis regards, suaveguru --- "Woods, Randall, SOBUS" wrote: > check it > > The WIC-2T provides two serial ports using the Smart > Serial connector. > > Asynchronous support with a maximum speed of 115.2 > Kbps, minimum 600 > bps. If you need to run at speeds lower than 600 > bps, use theAUX port > instead. > Synchronous support with a maximum speed of 2.048 > Mbps. > Supports one port at 8 Mbps when used in NM-1FE1R2W, > NM-1FE2W, NM-2FE2W, > or NM-2W or Cisco 2600 chassis WIC slots. All other > WIC ports on that > network module or Cisco 2600 chassis must not be > used. > > woody > > -----Original Message----- > From: suaveguru [mailto:[EMAIL PROTECTED]] > Sent: Friday, January 18, 2002 10:28 AM > To: [EMAIL PROTECTED] > Subject: RE: wic 1T [7:32133] > > > anyone knows what WIC should I use on a 26xxx if I > want it to support 8mbps knowing that WIC-1T only > support up to 2mbps > --- Stefan Dozier wrote: > > Actually the WIC-1T can be used in asynchronous > mode > > on the > > 1600 and 1700 series platforms! > > > > The command you're looking for is "physical-layer > > async" > > > > In all other platforms, it operates in sychronous > > mode "only". > > > > Stefan > > > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED]]On Behalf Of > > Daniel Cotts > > Sent: Wednesday, January 16, 2002 12:29 PM > > To: [EMAIL PROTECTED] > > Subject: RE: wic 1T [7:32133] > > > > > > The WIC-1T is synchronous only. > > > http://www.cisco.com/warp/public/107/hw_1t_wic.shtml > > > > If you want a WIC card that supports asynchronous > > serial then a WIC-2A/S > > would do. > > http://www.cisco.com/warp/public/107/wic-2as.shtml > > > > You mention modem support. Is your aux port free? > If > > so, any reason why it > > won't meet your needs? > > > > > -----Original Message----- > > > From: D'Wayne Saunders > > [mailto:[EMAIL PROTECTED]] > > > Sent: Wednesday, January 16, 2002 9:42 AM > > > To: [EMAIL PROTECTED] > > > Subject: wic 1T [7:32133] > > > > > > > > > Hi all > > > i have been searching on the cisco site for > some > > > information relating to > > > WIC1T. I have just installed one into a 1720 for > a > > modem > > > connection now by > > > cisco (or the information i can find ) the 1720 > > with this > > > module supports > > > both aysnc and sync's modes. > > > now my question is do i have to do anything > > special to get it > > > to work in > > > async mode . > > > by the way my ios is 12.0(3)T > > > > > > any help appreciated > > > > > > > > > D'Wayne Saunders, > > > Network Administrator > > > > > > Ph:08 89507742 > > > Fax:08 89521112 > > > Mobile: 0419 823 568 > > > > > > www.lasseters.com.au > > > > > > World's First Government Licensed and Regulated > > Online Casino... > > > > > > ************************************************************** > > > > > > ************************************************************* > > > > > > This email message (and attachments) may contain > > information that is > > > confidential to Lasseters Online. If > > > you are not the intended recipient you cannot > use, > > distribute > > > or copy the > > > message or attachments. In such > > > a case, please notify the sender by return email > > immediately > > > and erase all > > > copies of the message and > > > attachments. Opinions, conclusions and other > > information in > > > this message > > > and attachments that do not > > > relate to the official business of Lasseters > > Online are > > > neither given nor > > > endorsed by it. > > > > > > ************************************************************** > > > > > > ************************************************************* > [EMAIL PROTECTED] > > > __________________________________________________ > Do You Yahoo!? > Send FREE video emails in Yahoo! Mail! > http://promo.yahoo.com/videomail/ [EMAIL PROTECTED] __________________________________________________ Do You Yahoo!? Great stuff seeking new owners in Yahoo! Auctions! http://auctions.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=33277&t=32133 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]