To do reverse telnet to some Cat switches (with the RJ45 port), you need to "hardwire" pins 1 and 8 on the Cisco rollover cable. I had the same problem with a 2924XL and this solved the problem.
To do this, just "nick" the side of the rollover cable on pin 1 and pin 8 -- just enough to expose the conductor. Then solder a small strand of wire between pin 1 and pin 8. Should solve the problem. Paul Lalonde wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > All, > > I have a home lab setup and all the devices in the lab I can reverse telnet > to from my 2509, except for a 1924EN switch. When I try to reverse telnet > into this switch I never get a prompt back it just sort of hangs. I can't > seem to find anything on CCO in reference to this. I am sure some of you > guys have setup this same type setup before any help would be appreciated. > This is really confusing me something that seems so simple. I have 7 other > devices that I am able to reverse telnet into except for this one. > Maybe if you can point me to some docs or provide a sample config that > would be greatly appreciated. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=33518&t=33439 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
