Hi, How do I go about SPANning multiple vlans to a port. I have a 6000 IDSM blade in slot 9 and the monitoring port is 1. However, I can only span one vlan (one ingress session for both directions) at any one time.
"set span "vlan#" 9/1" Running this command again for another vlan will only make the previous vlan inactive for SPANning. My goal is to SPAN several (15) vlans or ALL the vlans. Any suggestions? thanks, Telemachus Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=33757&t=33757 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]