You could always span a trunk. Jeff ""Telemachus Luu"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi, > > How do I go about SPANning multiple vlans to a port. I have a 6000 IDSM > blade in slot 9 and the monitoring port is 1. However, I can only span one > vlan (one ingress session for both directions) at any one time. > > "set span "vlan#" 9/1" > > Running this command again for another vlan will only make the previous vlan > inactive for SPANning. > My goal is to SPAN several (15) vlans or ALL the vlans. Any suggestions? > > thanks, > Telemachus
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=33779&t=33757 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]