Man- any idea on this one... I'm trying to run two physical addresses on one logical Ethernet interface. I cannot quite understand what this error message is pointing me to do (especially since it's a 10BaseT link). The CCO has sent me to MPLS examples.
r4(config-subif)#inter e0.1 r4(config-subif)#ip address 10.1.1.1 255.255.255.0 Configuring IP routing on a LAN subinterface is only allowed if that subinterface is already configured as part of an IEEE 802.10, IEEE 802.1Q, or IS L vLAN. r4(config-subif)# Thanks Everyone !!! Phil Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=33789&t=33789 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]