You may also need to include a hostname and/or change your mac (I use comcast):
This is 12.2 code on a 2621. interface FastEthernet0/1 description To-Comcast mac-address 0123.45ab.cdef ip address dhcp hostname xxxxx ip access-group SECURE in no ip proxy-arp ip nat outside speed 100 full-duplex Andrew Cook ""Bob Chandler"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > interface Ethernet0 > ip address dhcp > ip nat outside > > interface Ethernet1 > description Private address space on inside > ip address x.x.x.x 255.255.255.0 > ip nat inside > ! > ip nat inside source list 1 interface Ethernet0 overload > ip classless > ip route 0.0.0.0 0.0.0.0 Ethernet0 > ! > access-list 1 permit x.x.x.0 0.0.0.255 > > Works good last long time > Bob > > - -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf > Of McHugh Randy > Sent: Sunday, February 03, 2002 4:16 PM > To: [EMAIL PROTECTED] > Subject: DHCP address with Cable on a Cisco router [7:34274] > > Can anyone please tell me if they have been able to make a Cisco 2514 > Router > hold a DHCP address to an ethernet interface so I can do NAT with > overload > for me cable internet connection? Once I get my dhcp address from my > provider I hard code that on to eth 0 which is pluged into the cable > modem. > on the router along with static default route with the dns info but > still > cant ping out to the internet from the router. DSL works fine but > cable does > not. > > > thanks > Randy > [EMAIL PROTECTED] > > -----BEGIN PGP SIGNATURE----- > Version: PGP 7.1 > > iQA/AwUBPF2zOlfAwLXxtQgrEQJMpQCg6Xc8pnS96bADHYbXiwfPn85V/MYAoKv7 > y41a1mHlQObaPAsnhUDW7ikK > =d9i8 > -----END PGP SIGNATURE----- Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=34283&t=34274 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
