Its not related to port ranges but network prefix ranges .. (prefix lists have replaced Distribute lists for Routing policy control )access-lists are no longer used.
This is what is says in the book .. the "ge-value" specifies the range of the prefix length to be matched for prefixes which are more secific than the network/prefix length. The range is assumed to be from ge-value to 32 if only the ge-value is specified the "le-value" specifies the range of the prefix length to be matched for prefixes which are more secific than the network/prefix length.The range is assumed to be from prefix length to "le-value" if only the le attribute is specified. .....examples ip prefix-list test1 permit 10.10.0.0/16 le 16 or ip prefix-list test2 permit 172.0.0.0/8 ge 18 or ip prefix-list test3 permit 172.0.0.0/8 ge 16 le 24 I think i've made that about as clear as mud ! ----- Original Message ----- From: "Scott Riley" To: Sent: Monday, February 04, 2002 12:33 PM Subject: RE: prefix lists .. [7:34312] > Do you mean "gt" and "lt" for "greater than" or "less than" specific > port numbers? > > Use extended access lists with an ACL number of 100 - 199 and a specific > protocol (TCP / UDP). > > Eg: > > Access-list 101 deny tcp 192.168.100.0 0.0.0.255 host 192.168.200.1 gt > 1024 > > HTH, > > Scott > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of > dk > Sent: 04 February 2002 12:07 > To: [EMAIL PROTECTED] > Subject: prefix lists .. [7:34312] > > > Can anyone help me get a handle on the "ge" and "le" options on prefix > lists? I find them totaly confusing. > > Thanks in advance for any advice offered > > David Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=34314&t=34312 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]