access-list 1 permit ip.of.sit.e1 (these are the sites you are rate-limiting.) access-list 1 permit ip.of.sit.e2 (these are the sites you are rate-limiting.)
interface serial x/x (the interface closest to the site you want to rate limit) rate-limit input access-group 1 XXX YYY ZZZ conform-action transmit exceed-action drop rate-limit output access-group 1 XXX YYY ZZZ conform-action transmit exceed-action drop XXX - Normal speed in bps (multpiples of 8) YYY - Normal Burst speed. (supposedly the minimum is XXX/2000, but I can't test it right now.) ZZZ - Max Burst speed. For more info, see this link on Cisco. http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fqos _r/qrfcmd8.htm -----Original Message----- From: Fernando Shiran [mailto:[EMAIL PROTECTED]] Sent: Saturday, February 02, 2002 10:32 AM To: [EMAIL PROTECTED] Subject: Limit Internet BW [7:34201] Hello, I do have a requirment to limit Internet Bandwidth among few sites. I do have a T1 and want to allow site A to be access bandwidth not more than 256K while site B can access full bandwidth without restricting. I do have a Cisco 2620 as the Gatway router. All ideas greatly appreciated. Regards Shiran Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=34329&t=34201 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
