What you are running on T1? If you are running Frame Relay, use FRTS to configure the CIR. Another way is to use rate-limit command on the interface. Another way is to use class based queuing to allocate the bandwithd to different class of services.
Nadeem ====== Fernando Shiran wrote: > Hello, > > I do have a requirment to limit Internet Bandwidth among few sites. I do > have a T1 and want to allow site A to be access bandwidth not more than 256K > while site B can access full bandwidth without restricting. > > I do have a Cisco 2620 as the Gatway router. All ideas greatly appreciated. > > Regards > Shiran -- ==================== Ishrat Nadeem Zahid CCNP Cisco Systems,Inc. Chelmsford, MA 01824 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=35590&t=34201 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]