Hi all I'm looking for a solution to this problem:
I have a 1601 router with 2 serial lines in async mode. On the first one is connected a PSTN modem as main link to corporate LAN, on the second serial there's a GSM modem that I'd like to use as a backup. Both modems call the same telephone number. Both serial line belong to pool 1, the first line has priority 100 and the second one has 1. When I make a connection to corporate LAN and the phone line in "up" and free, everything work fine, the router bring up the line with the highest priority. But, if the telephone line is busy or the PSTN modem is off, the router tries to make a connection always with the same line and, when the timeout expires, the connection is aborted and it never tries to use the second line. Does it exist a method to tell router to try the first line and, when the connection fails, to make a call with the second line ? Thanks Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=34604&t=34604 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]