Is it possible that the configuration for the voice port is using ground-start instead of loop-start mode? For analog phones it needs to be in loop-start.
-- James Haynes Network Architect Cendant IT A+,MCSE,CCNA,CCDA,CCNP,CCDP, CQS-SNA/IPSS ""Richard Botham"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi All, > > I have 2 x Cisco 2621 routers and each have a 2port fxs voice card - > vic-2fxs installed. > > When I plug my phone into port 1/0/0 of a vic-2fxs card installed in a 2621 > I get dial tone. > > When I use port 1/0/1 I do not get dial tone. > > Is there any reason for this and what am I doing wrong. > > Regards > Richard Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=34776&t=34768 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]