Richard I've had the very same problem some time ago, it was really annoying, can you post the config, it'll probably jog my memory as to what was wrong
Cheers Pat ----- Original Message ----- From: ""Richard Botham"" Newsgroups: groupstudy.cisco Sent: Thursday, February 07, 2002 6:13 PM Subject: VOIP & Vic-2fx cards [7:34768] > Hi All, > > I have 2 x Cisco 2621 routers and each have a 2port fxs voice card - > vic-2fxs installed. > > When I plug my phone into port 1/0/0 of a vic-2fxs card installed in a 2621 > I get dial tone. > > When I use port 1/0/1 I do not get dial tone. > > Is there any reason for this and what am I doing wrong. > > Regards > Richard _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=34832&t=34768 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
