Hi, You can use multiple 'radius-server host' or 'tacacs-server host' commands to specify multiple hosts. The software searches for hosts in the order you specify them. Example:
radius-server host RADIUS1 radius-server host RADIUS2 If RADIUS1 is down, RADIUS2 will be contacted. The same for TACACS: tacacs-server host TACACS1 tacacs-server host TACACS2 If TACACS1 is down, TACACS2 will be contacted. Of course if RADIUS1 or TACACS1 reject the request, RADIUS2 or TACACS2 will not be contacted. Regards, Georg Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=35073&t=35043 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]